ACMP_6.4 sample questions

Question 1

When creating a firewall rule what are valid choices for the Service/Application field? (Choose three)

Accepted Answer

Applications

Accepted Answer

Applications Category

Accepted Answer

Protocol

Answer

Internet Protocol

Answer

Internet Category

Question 2

Referring to the diagram provided for this question, an employee brought an unauthorized AP from home, but did not attach it to the LAN infrastructure. The APs are in the VLANs as shown in the diagram. Only AP1 is within RF range of the employee AP.
By default, how will the Aruba system classify the employee's AP?

Accepted Answer

an Interfering AP

Answer

an AP

Answer

an AM

Answer

a Rogue AP

Answer

a valid workstation

Question 3

ip access-list session anewone
user network 10.1.1.0 255.255.255.0 any permit
user any any permit
host 10.1.1.1 host 10.2.2.2 any deny
A user sends a frame with the following attributes:
Source IP: 10.1.1.1 Destination IP: 10.2.2.2 Destination Port: 25
Based on the above Mobility Controller configuration file segment, what will this policy do with the user frame?

Accepted Answer

The frame is accepted because of the statementuser any any permit.

Answer

The frame is discarded because of the implicit deny all at the end of the policy.

Answer

The frame is discarded because of the statement user host 10.1.1.1 host 10.2.2.2 deny.

Answer

The frame is accepted because of the statement user network 10.1.1.0 255.255.255.0 any permit.

Answer

This is not a valid policy.

Question 4

The Master fails with Central Licensing enabled. What happens to the local Controllers?

Accepted Answer

Locals operate for 30 days and accept new APs

Answer

Locals continue to operate for 1 day

Answer

Locals continue to operate for 90 days and accepts new APs

Answer

Locals can only use their originally installed Licenses

Answer

Locals will operate with active APs but not will accept any other APs

Question 5

An AP is not communicating with the controller. Upon investigation you find that the AP is not discovering its controller through DNS. Instead, it received a DHCP reply with option 43 specifying the SIP server's IP address. How do you resolve this problem?

Accepted Answer

On the DHCP server implement Option 60

Answer

statically configure the AP to ignore Option 43

Answer

Statically configure the AP to only use DNS resolution and not other dynamic discovery methods

Answer

After failing option 43 the AP should have proceeded with ADP, therefore the AP is faulty and needs to be replaced

Answer

The AP should be purged

Question 6

As an admin/root user, what other type of role-based management users can be created on Aruba controllers?

Accepted Answer

Guest provisioning user

Answer

Auditing-compliance user

Answer

AirWave management user

Answer

Reporting Generation user

Answer

Maintenance user

Question 7

What is the function of Station Handoff Assist, if enabled?

Accepted Answer

Force device off AP if RSSI is below threshold

Answer

Force device to 5Ghz band

Answer

Send message to device to change AP

Answer

Send message to adjoining AP to accept device

Answer

Send message to adjoining AP to initiate association to the device

Question 8

A university has 2 departments. Department 1 has its own mobility domain with one controller. Department 2 has multiple controllers configured in a second domain. The university is planning on offering a new application and needs users to be able to roam between both mobility domains.
What is the best way to accomplish this?

Accepted Answer

Merge the controllers into the same mobility domain

Answer

The 2 existing domains should be left as they are. A 3rd mobility domain should then be created and all 3 controllers need to be added to it

Answer

The IP subnets of all controllers need to be configured to match

Answer

This cannot be accomplished

Answer

Create a new domain between a department 1 controller and one of the department 2 controllers

Question 9

A client device associates with an SSID provisioned with 802.1X authentication. The client is set for PEAP authentication. EAP termination (AAA Fastconnect) is disabled on the controller. But the client continuously cycles through the authentication process. Which of the following could cause this? (Choose two)

Accepted Answer

The client is provisioned with the wrong EAP type.

Accepted Answer

The client has an expired or revoked server certificate.

Answer

The DHCP server is not enabled.

Answer

The VLAN is missing for the SSID.

Answer

The controller does not support PEAP in this mode.

Question 10

Which of the following licenses are consumed by Mesh APs advertising an SSIDs?

Accepted Answer

AP license

Answer

Mesh license

Answer

PEF-V license

Answer

No license is required

Answer

RAP License

ACMP_6.4 Sample Questions & Answers

Ready for the real thing?

ACMP_6.4 Sample Questions & Answers

Related practice tests

Ready for the real thing?